purdy electronics corporation ? 720 palomar avenue ? sunnyvale, ca 94085 tel: 408.523.8200 ? fax: 408.733.1287 ? sales@purdyelectronics.com ? www.purdyelectronics.com 7/18/07 AND190HBA ultra bright led lamps: type 3 weight: 1.0g unit: mm 2.0 0.2 13.5 0.3 11.0 0.3 10.0 0.2 25.4 min. 1.0 min. 1. anode 2. cathode 12 cathode index 0.5 2.54 0.5 AND190HBA gan high brightness blue light emission t-3 package (10 mm) features ? new emission material (gan) blue led ? peak wavelength ( p = 430 nm) high bright emission ? all plastic mold type, clear colorless lens ? low drive current, (forward current = 1 to 20 ma) ? excellent on-off contrast ratio ? fast response time, capable of pulse operation ? high power luminous intensity ? suitable for outdoor message signboards, automotive use maximum ratings (t a = 25c) characteristics symbol rating unit forward current i f 30 ma reverse voltage v r 5v power dissipation p d 125 mw operating temperature range t opr -40 to 85 c storage temperature range t stg -40 to 100 c precaution please be careful of the following: 1. soldering temperature: 260c max soldering time: 5 sec. max soldering portion of lead: up to 1.6 mm from the body of the device 2. the lead can be formed up to 5 mm from the body of the device without forming stress. soldering should be performed after the lead forming. 3. absolute secure counter measures against static electricity and surge should be taken when handling these products. it is recommended to use wrist band or antistatic gloves when handling these leds. electro-optical characteristics (t a = 25c) characteristics symbol test condition minimum typical maximum unit forward voltage v f i f = 20 ma C3.84.5 v reverse current i r v r = 5 v C C 10 a luminous intensity i v i f = 20 ma 1,000 1,500 C mcd peak emission wavelength p i f = 20 ma C 430 C nm spectral line half width ? i f = 20 ma C65Cnm dominant wavelength d i f = 20 ma C 466 C nm full viewing angle i v = 1/2 peak C 10 C degree product speci?cations contained herein may be changed without prior notice. it is therefore advisable to contact purdy electronics before proceeding with the design of equipment incorporating this produc t. ? rohs compliant
AND190HBA gan high brightness blue light emission ultra bright led lamps: type 3 purdy electronics corporation ? 720 palomar avenue ? sunnyvale, ca 94085 tel: 408.523.8200 ? fax: 408.733.1287 ? sales@purdyelectronics.com ? www.purdyelectronics.com 7/18/07 -20 0 20 40 60 80 0.1 0.3 0.5 1 3 i v C t c case temperature t c ( c) relative luminous intensity i f C t a ambient temperature t a ( c) allowable forward current i f (ma) 0 20 40 60 80 100 0 10 20 30 40 300 350 400 450 500 550 600 0 0.2 0.4 0.6 0.8 1.0 relative luminous intensity C wavelength wavelength (nm) relative luminous intensity i f = 20 ma t a = 25 c radiation pattern t a = 25 c 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 0.2 00.40.8 0.6 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 1 3 5 10 30 50 i f C v f forward voltage v f (v) forward current i f (ma) t a = 25 c 0.5 1 3 5 10 30 50 100 50 100 3000 1000 500 300 5000 t a = 25 c i v C i f forward current i f (ma) luminous intensity i v (mcd)
|
